Aquate Pump Stations are ideal for civil infrastructure applications where sewage or stormwater needs to be discharged into a reticulation network or wastewater treatment plant.
Aquate offers a wide range of high-performance and durable packaged pump stations. These systems include chambers, pumps, level controls, control equipment, piping, valves, and more. Manufactured in Aquate Precast Factories, Aquate Pump stations are available in either concrete or polyethylene. Our dedicated design team at Aquate provides complete design and specification services for consulting engineers and contractors. No matter what challenges your project presents, Aquate’s expert engineers will work with you step by step to custom-design the perfect pump station solution. Safety in design, environmental risk mitigation, and ease of maintenance for servicing are always prioritized.
Features & Benefits
Flexible Design
Aquate Pump Stations are designed to provide the required on-site storage and optimal pump performance.
Easy Installation
The systems are prefabricated in the factory, providing easy installation on site.
High Quality Pumps
Brands include Flygt, Grundfos, Domo, and Zenit. Pumps are designed to meet site-specific requirements.
Applications
From residential subdivisions, schools, factories and commercial developments to stormwater networks, our complete range of pump stations is the solution for any sewer, stormwater or trade waste application.
Approvals/Standards
- Concrete components designed and
manufactured to AS/NZS 4058:2007 Precast Concrete Pipes - AS/NZS 1546:1 2008 – tank certification
- AS/NZS3000 – electrical controller
Technical Data
| Aquate model no. | AQ1200 | AQ1500 | AQ1800 | AQ2050 | AQ2500 | AQ3000 |
| internal diameter (mm) | 1200 | 1500 | 1800 | 2020 | 2550 | 3000 |
| max chamber depth (m) | 4.8 | 4.8 | 6.0 | 6.0 | 8.0 | 10.0 |
| min. riser sections (mm) | 300 | 300 | 300 | 300 | 300 | 300 |
| Valve chamber diameter (m) | 1.2 | 1.2 | 1.5 | 1.5 | 1.8 | 1.8 |
| min volume wet-well (l) | 2000 | 3500 | 5000 | 7000 | 10000 | 17000 |
| Volume per additional metre depth (l) | 1130 | 1760 | 2550 | 3100 | 5100 | 7050 |
| maximum pipework size (mm) | 100 | 150 | 200 | 250 | 300 | 300 |
Options
- Web Based Monitoring
- Float switches, hydrostatic transducers, or ultrasonic level sensors
- Steel cabinets
- Hour run and start count
- Integration into a SCADA System
- Mag flow meters
- Alarm telemetry (SMS alarms), radio transmission, or outputs to BMS
- Flow meters to monitor usage
- Auto well-washer for automatic station cleaning
- Odour filters
- Internal linings to prevent corrosion
- Lifting arm socket to simplify maintenance procedures
- Storage tank for emergency storage
Control Panel
Aquate Pump Stations come complete with an electrical controller. This can be located on the pump chamber or installed at a nearby building.
Features include:
- Single or three phase option
- Simplex or duplex pump operation
- Lockable IP 65 rated enclosure
- Visual and audible pump failure alarm system
- High level alarm
- Over pressure protection
- Pump motor protection against variable electricity supply
- Performance data recorded
Commercial Pump Station Projects
Backup and Servicing
Aquate can supply service agents throughout New Zealand. In the unlikely event of an alarm activation there is typically sufficient storage in the tank for 24 hours of normal operation. In the event of an alarm, either Hynds or the Local Council’s Utility Services Team can provide onsite service.